Arch Linux

[markusssss]

salve ragazzi!
ho ricevuto in regalo questa stampante Epson SX235W ma non so da dove iniziare per installarla su Arch..
ho cercato un po in giro i driver...ho dato un'occhiata qui:
http://www.openprinting.org/printer/Eps ... 235_Series

ma non so che pesci prendere..mi dareste una mano?

[Hilinus]

Cercando il modello della tua stampante ho trovato questo su AUR:
https://aur.archlinux.org/packages.php?ID=53561

[markusssss]

si infatti ci sono arrivato dopo..

l'ho installato...ma in CUPS la mia stampante non viene riconosciuta quando provo ad aggiungerne una nuova..

[markusssss]

help me

[umby213]

prova a caricare il modulo usblp prima di aggiungere la stampante... forse serve riavviare cups, non ricordo ora...

[markusssss]

mmm come faccio a caricare questo modulo?

[umby213]

Codice: Seleziona tutto

# modprobe usblp

poi riavvia cups...

Codice: Seleziona tutto

# /etc/rc.d/cupsd restart

tutto da root...

ora prova a vedere se la stampante viene riconosciuta...

[markusssss]

ho risolto cosi:

Codice: Seleziona tutto

sudo nano /etc/modprobe.d/blacklist.conf

aggiungendo

Codice: Seleziona tutto

blacklist usblp

[umby213]

ecco... allora la soluzione era l'opposto di quel che ti ho detto io...

[markusssss]

ho scritto Risolto troppo velocemente... la stampante funziona perfettamente...ora però ho due problemi:
- lo scanner? che programma devo installare per usarlo?
- questa stampante è dotata di wi-fi come faccio a farla funzionare con questa modalità?

per quanto riguarda lo scanner..ho installato XSane solo che la scansione non si avvia...
cosi mi sono rivolto al mio amato terminale e ho questo problema...

Codice: Seleziona tutto

[markus@Nosonja ~]$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.
  # Also you need support for SCSI Generic (sg) in your operating system.
  # If using Linux, try "modprobe sg".

libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied.
libusb requires write access to USB device nodes.
found USB scanner (vendor=0x04b8, product=0x0885) at libusb:001:007
libusb couldn't open USB device /dev/bus/usb/001/004: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/001/004: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/001/005: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/001/005: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied.
libusb requires write access to USB device nodes.
libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
libusb requires write access to USB device nodes.
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.


[4javier]

hai aggiunto il tuo utente al gruppo scanner?
https://wiki.archlinux.org/index.php/Sane

[markusssss]

era quelloooo!!!

[markusssss]

scusate se riapro il post...ma ho di nuovo problemi con la stampante...non stampa più, mentre lo scanner funziona perfettamente con Sane o iScan.
Cosi sono andato in Cups e ho disinstallato la stampante...e cercavo di rianggiungerla..ma non c'è verso di farla comparire quando premo su "Aggiungi stampante"
cosi ho pensato di rocopiarvi il file log degli errori ci Cups..spero possa essere utile:

Codice: Seleziona tutto

D [30/Mar/2012:18:44:06 +0200] cupsdReadClient: 15 GET /admin HTTP/1.1
D [30/Mar/2012:18:44:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [30/Mar/2012:18:44:06 +0200] cupsdAuthorize: Authorized as root using Basic
D [30/Mar/2012:18:44:06 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@Nosonja"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.2"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[13] = "USER=root"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[16] = "IPP_PORT=631"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[18] = "LANG=it_IT.UTF8"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[22] = "SERVER_PORT=631"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[27] = "REMOTE_USER=root"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=706fa59aff06993723ef5a27e8500f13"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux i686) AppleWebKit/536.3 (KHTML, like Gecko) Chrome/19.0.1071.0 Safari/536.3"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [30/Mar/2012:18:44:06 +0200] [CGI] envp[33] = "QUERY_STRING="
D [30/Mar/2012:18:44:06 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 2003)
I [30/Mar/2012:18:44:06 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=2003)
D [30/Mar/2012:18:44:06 +0200] cupsdSendCommand: 15 file=21
D [30/Mar/2012:18:44:06 +0200] [CGI] admin.cgi started...
D [30/Mar/2012:18:44:06 +0200] cupsdAcceptClient: 22 from localhost (Domain)
D [30/Mar/2012:18:44:06 +0200] [CGI] http=0xb848b850
D [30/Mar/2012:18:44:06 +0200] [CGI] org.cups.sid cookie is "706fa59aff06993723ef5a27e8500f13"
D [30/Mar/2012:18:44:06 +0200] [CGI] No form data, showing main menu...
D [30/Mar/2012:18:44:06 +0200] [CGI] /usr/share/cups/drivers/pscript5.dll: File o directory non esistente
D [30/Mar/2012:18:44:06 +0200] cupsdReadClient: 22 POST / HTTP/1.1
D [30/Mar/2012:18:44:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [30/Mar/2012:18:44:06 +0200] cupsdAuthorize: No authentication data provided.
D [30/Mar/2012:18:44:06 +0200] cupsdReadClient: 22 1.1 Get-Subscriptions 1
D [30/Mar/2012:18:44:06 +0200] Get-Subscriptions ipp://localhost/
D [30/Mar/2012:18:44:06 +0200] Get-Subscriptions client-error-not-found: Nessuna sottoscrizione trovata.
D [30/Mar/2012:18:44:06 +0200] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
D [30/Mar/2012:18:44:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [30/Mar/2012:18:44:06 +0200] Script header: Content-Type: text/html;charset=utf-8
D [30/Mar/2012:18:44:06 +0200] Script header:
D [30/Mar/2012:18:44:06 +0200] PID 2003 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [30/Mar/2012:18:44:06 +0200] cupsdReadClient: 22 WAITING Closing on EOF
D [30/Mar/2012:18:44:06 +0200] cupsdCloseClient: 22
D [30/Mar/2012:18:44:06 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [30/Mar/2012:18:44:06 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [30/Mar/2012:18:44:08 +0200] cupsdReadClient: 15 GET /admin/log/error_log? HTTP/1.1
D [30/Mar/2012:18:44:08 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [30/Mar/2012:18:44:08 +0200] cupsdAuthorize: Authorized as root using Basic

[4javier]

Specificate sempre quando non utilizzate Arch ma una sua derivata. Sposto in Altro.

[markusssss]

hai perfettamente ragione scusami.
un piccolo aiutino sarebbe graditissimo... ho urgenza di stampare materiale per la mia tesi

[markusssss]

avevo trovato questo articolo...la stampante viene correttamente riconosciuta con l'usb...ma non so procedere con la creazione della regola..mi sa che è qllo il problema!
http://italialinux.altervista.org/blog/ ... pante-usb/

[veleno77]

oltre al fatto di non aver specificato che non usavi arch genuina (ed è la seconda volta) hai spesso risolto e chiesto cose che si trovano ampiamente spiegate nel wiki di Arch, compresa la creazione delle regole. leggi bene sia il wiki di cups che di sane, se poi vuoi aiutarti con quell'articolo fai pure. in un secondo momento potresti poi chiedere qui.