Avvio e configurazione del server X, KDE, GNOME e tutti gli altri WM

Messaggio13 febbraio 2012, 23:20 - [Risolto] Problema con X #115047

Premetto, e questa mi sembra la cosa più incredibile, che non ho fatto aggiornamenti da almeno 3 settimane.
Ieri sera accendo il pc e mi trovo, invece che davanti al desktop kde, a una bella schermata nera del terminale, in attesa del login.
Superato lo stupore, faccio login e da terminale lancio startx. Questo è l'output:

Codice: Seleziona tutto
X.Org X Server 1.11.3
Release Date: 2011-12-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.1.5-1-ARCH i686
Current Operating System: Linux anacleto 3.2.1-2-ARCH #1 SMP PREEMPT Mon Jan 23 12:50:27 UTC 2012 i686
Kernel command line: root=/dev/sda6 ro
Build Date: 17 December 2011  09:38:27AM
 
Current version of pixman: 0.24.2
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 13 22:15:21 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
FATAL: Module fbcon not found.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost

waiting for X server to shut down Server terminated successfully (0). Closing log file.



Nel file Xorg.0.log ho questo:

Codice: Seleziona tutto
[  4582.432]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[  4582.432] X Protocol Version 11, Revision 0
[  4582.432] Build Operating System: Linux 3.1.5-1-ARCH i686
[  4582.432] Current Operating System: Linux anacleto 3.2.1-2-ARCH #1 SMP PREEMPT Mon Jan 23 12:50:27 UTC 2012 i686
[  4582.432] Kernel command line: root=/dev/sda6 ro
[  4582.432] Build Date: 17 December 2011  09:38:27AM
[  4582.432] 
[  4582.432] Current version of pixman: 0.24.2
[  4582.433]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  4582.433] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  4582.433] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 13 22:15:21 2012
[  4582.433] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  4582.433] (==) No Layout section.  Using the first Screen section.
[  4582.434] (==) No screen section available. Using defaults.
[  4582.434] (**) |-->Screen "Default Screen Section" (0)
[  4582.434] (**) |   |-->Monitor "<default monitor>"
[  4582.434] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[  4582.434] (==) Automatically adding devices
[  4582.434] (==) Automatically enabling devices
[  4582.434] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  4582.434]     Entry deleted from font path.
[  4582.434] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  4582.434]     Entry deleted from font path.
[  4582.434]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  4582.434] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  4582.435]     Entry deleted from font path.
[  4582.435]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  4582.435] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
[  4582.435] (==) ModulePath set to "/usr/lib/xorg/modules"
[  4582.435] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[  4582.435] (II) Loader magic: 0x8228580
[  4582.435] (II) Module ABI versions:
[  4582.435]     X.Org ANSI C Emulation: 0.4
[  4582.435]     X.Org Video Driver: 11.0
[  4582.435]     X.Org XInput driver : 13.0
[  4582.435]     X.Org Server Extension : 6.0
[  4582.436] (--) PCI:*(0:0:2:0) 8086:a001:8086:4f4d rev 2, Mem @ 0xe0200000/524288, 0xd0000000/268435456, 0xe0100000/1048576, I/O @ 0x000020c0/8
[  4582.437] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  4582.437] (II) LoadModule: "extmod"
[  4582.437] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  4582.438] (II) Module extmod: vendor="X.Org Foundation"
[  4582.438]     compiled for 1.11.3, module version = 1.0.0
[  4582.438]     Module class: X.Org Server Extension
[  4582.438]     ABI class: X.Org Server Extension, version 6.0
[  4582.438] (II) Loading extension MIT-SCREEN-SAVER
[  4582.438] (II) Loading extension XFree86-VidModeExtension
[  4582.438] (II) Loading extension XFree86-DGA
[  4582.438] (II) Loading extension DPMS
[  4582.438] (II) Loading extension XVideo
[  4582.438] (II) Loading extension XVideo-MotionCompensation
[  4582.438] (II) Loading extension X-Resource
[  4582.438] (II) LoadModule: "dbe"
[  4582.438] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  4582.439] (II) Module dbe: vendor="X.Org Foundation"
[  4582.439]     compiled for 1.11.3, module version = 1.0.0
[  4582.439]     Module class: X.Org Server Extension
[  4582.439]     ABI class: X.Org Server Extension, version 6.0
[  4582.439] (II) Loading extension DOUBLE-BUFFER
[  4582.439] (II) LoadModule: "glx"
[  4582.439] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  4582.439] (II) Module glx: vendor="X.Org Foundation"
[  4582.439]     compiled for 1.11.3, module version = 1.0.0
[  4582.439]     ABI class: X.Org Server Extension, version 6.0
[  4582.439] (==) AIGLX enabled
[  4582.440] (II) Loading extension GLX
[  4582.440] (II) LoadModule: "record"
[  4582.440] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  4582.440] (II) Module record: vendor="X.Org Foundation"
[  4582.440]     compiled for 1.11.3, module version = 1.13.0
[  4582.440]     Module class: X.Org Server Extension
[  4582.440]     ABI class: X.Org Server Extension, version 6.0
[  4582.440] (II) Loading extension RECORD
[  4582.440] (II) LoadModule: "dri"
[  4582.441] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  4582.441] (II) Module dri: vendor="X.Org Foundation"
[  4582.441]     compiled for 1.11.3, module version = 1.0.0
[  4582.441]     ABI class: X.Org Server Extension, version 6.0
[  4582.441] (II) Loading extension XFree86-DRI
[  4582.441] (II) LoadModule: "dri2"
[  4582.442] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  4582.442] (II) Module dri2: vendor="X.Org Foundation"
[  4582.442]     compiled for 1.11.3, module version = 1.2.0
[  4582.442]     ABI class: X.Org Server Extension, version 6.0
[  4582.442] (II) Loading extension DRI2
[  4582.442] (==) Matched intel as autoconfigured driver 0
[  4582.442] (==) Matched vesa as autoconfigured driver 1
[  4582.442] (==) Matched fbdev as autoconfigured driver 2
[  4582.442] (==) Assigned the driver to the xf86ConfigLayout
[  4582.442] (II) LoadModule: "intel"
[  4582.443] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  4582.443] (II) Module intel: vendor="X.Org Foundation"
[  4582.443]     compiled for 1.11.2, module version = 2.17.0
[  4582.443]     Module class: X.Org Video Driver
[  4582.443]     ABI class: X.Org Video Driver, version 11.0
[  4582.443] (II) LoadModule: "vesa"
[  4582.444] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  4582.444] (II) Module vesa: vendor="X.Org Foundation"
[  4582.444]     compiled for 1.11.1, module version = 2.3.0
[  4582.444]     Module class: X.Org Video Driver
[  4582.444]     ABI class: X.Org Video Driver, version 11.0
[  4582.444] (II) LoadModule: "fbdev"
[  4582.445] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  4582.445] (II) Module fbdev: vendor="X.Org Foundation"
[  4582.445]     compiled for 1.10.99.902, module version = 0.4.2
[  4582.445]     ABI class: X.Org Video Driver, version 11.0
[  4582.445] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[  4582.446] (II) VESA: driver for VESA chipsets: vesa
[  4582.446] (II) FBDEV: driver for framebuffer: fbdev
[  4582.447] (--) using VT number 7

[  4582.464] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  4582.464] (WW) Falling back to old probe method for vesa
[  4582.464] (WW) Falling back to old probe method for fbdev
[  4582.464] (II) Loading sub module "fbdevhw"
[  4582.464] (II) LoadModule: "fbdevhw"
[  4582.465] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  4582.465] (II) Module fbdevhw: vendor="X.Org Foundation"
[  4582.465]     compiled for 1.11.3, module version = 0.0.2
[  4582.465]     ABI class: X.Org Video Driver, version 11.0
[  4582.465] drmOpenDevice: node name is /dev/dri/card0
[  4582.465] drmOpenDevice: open result is 8, (OK)
[  4582.465] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[  4582.465] drmOpenDevice: node name is /dev/dri/card0
[  4582.466] drmOpenDevice: open result is 8, (OK)
[  4582.466] drmOpenByBusid: drmOpenMinor returns 8
[  4582.466] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[  4582.466] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[  4582.466] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  4582.466] (==) intel(0): RGB weight 888
[  4582.466] (==) intel(0): Default visual is TrueColor
[  4582.466] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G
[  4582.466] (--) intel(0): Chipset: "Pineview G"
[  4582.466] (**) intel(0): Relaxed fencing enabled
[  4582.466] (**) intel(0): Wait on SwapBuffers? enabled
[  4582.466] (**) intel(0): Triple buffering? enabled
[  4582.466] (**) intel(0): Framebuffer tiled
[  4582.466] (**) intel(0): Pixmaps tiled
[  4582.466] (**) intel(0): 3D buffers tiled
[  4582.466] (**) intel(0): SwapBuffers wait enabled
[  4582.466] (==) intel(0): video overlay key set to 0x101fe
[  4582.467] (II) intel(0): Output LVDS1 has no monitor section
[  4582.467] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[  4582.539] (II) intel(0): Output VGA1 has no monitor section
[  4582.539] (II) intel(0): EDID for output LVDS1
[  4582.539] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[  4582.539] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  4582.539] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  4582.539] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[  4582.539] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[  4582.539] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[  4582.539] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[  4582.539] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[  4582.539] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[  4582.540] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[  4582.540] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[  4582.540] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[  4582.540] (II) intel(0): Printing probed modes for output LVDS1
[  4582.540] (II) intel(0): Modeline "1280x800"x58.1   68.90  1280 1292 1340 1440  800 804 807 823 -hsync -vsync (47.8 kHz)
[  4582.540] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  4582.540] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[  4582.540] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[  4582.540] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[  4582.605] (II) intel(0): EDID for output VGA1
[  4582.605] (II) intel(0): Manufacturer: ACI  Model: 17b7  Serial#: 16843009
[  4582.605] (II) intel(0): Year: 2008  Week: 34
[  4582.605] (II) intel(0): EDID Version: 1.3
[  4582.605] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[  4582.605] (II) intel(0): Sync:  Separate
[  4582.606] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[  4582.606] (II) intel(0): Gamma: 2.20
[  4582.606] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[  4582.606] (II) intel(0): Default color space is primary color space
[  4582.606] (II) intel(0): First detailed timing is preferred mode
[  4582.606] (II) intel(0): redX: 0.655 redY: 0.337   greenX: 0.273 greenY: 0.617
[  4582.606] (II) intel(0): blueX: 0.144 blueY: 0.079   whiteX: 0.313 whiteY: 0.329
[  4582.606] (II) intel(0): Supported established timings:
[  4582.606] (II) intel(0): 720x400@70Hz
[  4582.606] (II) intel(0): 640x480@60Hz
[  4582.606] (II) intel(0): 640x480@67Hz
[  4582.606] (II) intel(0): 640x480@72Hz
[  4582.606] (II) intel(0): 640x480@75Hz
[  4582.606] (II) intel(0): 800x600@56Hz
[  4582.606] (II) intel(0): 800x600@60Hz
[  4582.606] (II) intel(0): 800x600@72Hz
[  4582.606] (II) intel(0): 800x600@75Hz
[  4582.606] (II) intel(0): 832x624@75Hz
[  4582.606] (II) intel(0): 1024x768@60Hz
[  4582.606] (II) intel(0): 1024x768@70Hz
[  4582.606] (II) intel(0): 1024x768@75Hz
[  4582.606] (II) intel(0): 1280x1024@75Hz
[  4582.606] (II) intel(0): 1152x864@75Hz
[  4582.606] (II) intel(0): Manufacturer's mask: 0
[  4582.606] (II) intel(0): Supported standard timings:
[  4582.607] (II) intel(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  4582.607] (II) intel(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[  4582.607] (II) intel(0): Supported detailed timing:
[  4582.607] (II) intel(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[  4582.607] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[  4582.607] (II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[  4582.607] (II) intel(0): Serial No: 88LMVD058464
[  4582.607] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
[  4582.607] (II) intel(0): Monitor name: ASUS VB172
[  4582.607] (II) intel(0): EDID (in hex):
[  4582.607] (II) intel(0):     00ffffffffffff000469b71701010101
[  4582.607] (II) intel(0):     2212010308221b782ed0d5a756469e24
[  4582.607] (II) intel(0):     145054bfef808180714f010101010101
[  4582.607] (II) intel(0):     010101010101302a009851002a403070
[  4582.607] (II) intel(0):     1300520e1100001e000000ff0038384c
[  4582.607] (II) intel(0):     4d56443035383436340a000000fd0038
[  4582.607] (II) intel(0):     4b1f500e000a202020202020000000fc
[  4582.607] (II) intel(0):     00415355532056423137320a202000d6
[  4582.607] (II) intel(0): Printing probed modes for output VGA1
[  4582.607] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[  4582.607] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[  4582.607] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[  4582.608] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[  4582.608] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[  4582.608] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  4582.608] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[  4582.608] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[  4582.608] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[  4582.608] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[  4582.608] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[  4582.608] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[  4582.608] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[  4582.608] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[  4582.608] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[  4582.608] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[  4582.608] (II) intel(0): Output LVDS1 connected
[  4582.608] (II) intel(0): Output VGA1 connected
[  4582.608] (II) intel(0): Using fuzzy aspect match for initial modes
[  4582.608] (II) intel(0): Output LVDS1 using initial mode 1024x768
[  4582.608] (II) intel(0): Output VGA1 using initial mode 1024x768
[  4582.608] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  4582.608] (II) intel(0): Kernel page flipping support detected, enabling
[  4582.609] (==) intel(0): DPI set to (96, 96)
[  4582.609] (II) Loading sub module "fb"
[  4582.609] (II) LoadModule: "fb"
[  4582.609] (II) Loading /usr/lib/xorg/modules/libfb.so
[  4582.609] (II) Module fb: vendor="X.Org Foundation"
[  4582.609]     compiled for 1.11.3, module version = 1.0.0
[  4582.609]     ABI class: X.Org ANSI C Emulation, version 0.4
[  4582.610] (II) Loading sub module "dri2"
[  4582.610] (II) LoadModule: "dri2"
[  4582.610] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  4582.610] (II) Module dri2: vendor="X.Org Foundation"
[  4582.610]     compiled for 1.11.3, module version = 1.2.0
[  4582.610]     ABI class: X.Org Server Extension, version 6.0
[  4582.610] (II) UnloadModule: "vesa"
[  4582.610] (II) Unloading vesa
[  4582.610] (II) UnloadModule: "fbdev"
[  4582.610] (II) Unloading fbdev
[  4582.610] (II) UnloadModule: "fbdevhw"
[  4582.610] (II) Unloading fbdevhw
[  4582.610] (==) Depth 24 pixmap format is 32 bpp
[  4582.611] (II) intel(0): [DRI2] Setup complete
[  4582.611] (II) intel(0): [DRI2]   DRI driver: i915
[  4582.611] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[  4582.611] (II) UXA(0): Driver registered support for the following operations:
[  4582.611] (II)         solid
[  4582.611] (II)         copy
[  4582.611] (II)         composite (RENDER acceleration)
[  4582.611] (II)         put_image
[  4582.611] (II)         get_image
[  4582.611] (==) intel(0): Backing store disabled
[  4582.611] (==) intel(0): Silken mouse enabled
[  4582.611] (II) intel(0): Initializing HW Cursor
[  4583.046] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  4583.047] (==) intel(0): DPMS enabled
[  4583.047] (==) intel(0): Intel XvMC decoder disabled
[  4583.047] (II) intel(0): Set up textured video
[  4583.047] (II) intel(0): Set up overlay video
[  4583.047] (II) intel(0): direct rendering: DRI2 Enabled
[  4583.047] (==) intel(0): hotplug detection: "enabled"
[  4583.047] (--) RandR disabled
[  4583.048] (II) Initializing built-in extension Generic Event Extension
[  4583.048] (II) Initializing built-in extension SHAPE
[  4583.048] (II) Initializing built-in extension MIT-SHM
[  4583.048] (II) Initializing built-in extension XInputExtension
[  4583.048] (II) Initializing built-in extension XTEST
[  4583.048] (II) Initializing built-in extension BIG-REQUESTS
[  4583.048] (II) Initializing built-in extension SYNC
[  4583.048] (II) Initializing built-in extension XKEYBOARD
[  4583.048] (II) Initializing built-in extension XC-MISC
[  4583.048] (II) Initializing built-in extension SECURITY
[  4583.048] (II) Initializing built-in extension XINERAMA
[  4583.048] (II) Initializing built-in extension XFIXES
[  4583.048] (II) Initializing built-in extension RENDER
[  4583.048] (II) Initializing built-in extension RANDR
[  4583.048] (II) Initializing built-in extension COMPOSITE
[  4583.048] (II) Initializing built-in extension DAMAGE
[  4583.080] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  4583.081] (II) AIGLX: enabled GLX_INTEL_swap_event
[  4583.081] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  4583.081] (II) AIGLX: enabled GLX_SGI_make_current_read
[  4583.081] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  4583.081] (II) AIGLX: Loaded and initialized i915
[  4583.081] (II) GLX: Initialized DRI2 GL provider for screen 0
[  4583.082] (II) intel(0): Setting screen physical size to 270 x 203
[  4583.205] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  4583.205] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  4583.205] (II) LoadModule: "evdev"
[  4583.206] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4583.206] (II) Module evdev: vendor="X.Org Foundation"
[  4583.206]     compiled for 1.10.99.902, module version = 2.6.0
[  4583.206]     Module class: X.Org XInput Driver
[  4583.206]     ABI class: X.Org XInput driver, version 13.0
[  4583.206] (II) Using input driver 'evdev' for 'Power Button'
[  4583.206] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4583.207] (**) Power Button: always reports core events
[  4583.207] (**) Power Button: Device: "/dev/input/event2"
[  4583.207] (--) Power Button: Found keys
[  4583.207] (II) Power Button: Configuring as keyboard
[  4583.207] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  4583.207] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  4583.207] (**) Option "xkb_rules" "evdev"
[  4583.207] (**) Option "xkb_model" "evdev"
[  4583.207] (**) Option "xkb_layout" "it"
[  4583.277] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[  4583.277] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  4583.278] (II) Using input driver 'evdev' for 'Sleep Button'
[  4583.278] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4583.278] (**) Sleep Button: always reports core events
[  4583.278] (**) Sleep Button: Device: "/dev/input/event1"
[  4583.278] (--) Sleep Button: Found keys
[  4583.278] (II) Sleep Button: Configuring as keyboard
[  4583.278] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[  4583.278] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[  4583.278] (**) Option "xkb_rules" "evdev"
[  4583.278] (**) Option "xkb_model" "evdev"
[  4583.278] (**) Option "xkb_layout" "it"
[  4583.279] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[  4583.279] (II) No input driver/identifier specified (ignoring)
[  4583.280] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event5)
[  4583.280] (II) No input driver/identifier specified (ignoring)
[  4583.281] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  4583.281] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  4583.281] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  4583.281] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4583.281] (**) AT Translated Set 2 keyboard: always reports core events
[  4583.281] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  4583.281] (--) AT Translated Set 2 keyboard: Found keys
[  4583.281] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[  4583.281] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  4583.281] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[  4583.282] (**) Option "xkb_rules" "evdev"
[  4583.282] (**) Option "xkb_model" "evdev"
[  4583.282] (**) Option "xkb_layout" "it"
[  4583.283] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event6)
[  4583.283] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[  4583.283] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[  4583.283] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  4583.283] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[  4583.283] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event6"
[  4583.283] (--) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[  4583.283] (--) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[  4583.283] (--) ImExPS/2 Generic Explorer Mouse: Found relative axes
[  4583.283] (--) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[  4583.284] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[  4583.284] (II) ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[  4583.284] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[  4583.284] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  4583.284] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[  4583.284] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 9)
[  4583.284] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[  4583.284] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[  4583.284] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[  4583.284] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[  4583.284] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[  4583.285] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[  4583.285] (II) No input driver/identifier specified (ignoring)
[  4583.286] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[  4583.286] (II) No input driver/identifier specified (ignoring)
[  4583.449] (II) Power Button: Close
[  4583.449] (II) UnloadModule: "evdev"
[  4583.449] (II) Unloading evdev
[  4583.552] (II) Sleep Button: Close
[  4583.553] (II) UnloadModule: "evdev"
[  4583.553] (II) Unloading evdev
[  4583.682] (II) AT Translated Set 2 keyboard: Close
[  4583.682] (II) UnloadModule: "evdev"
[  4583.683] (II) Unloading evdev
[  4583.789] (II) ImExPS/2 Generic Explorer Mouse: Close
[  4583.789] (II) UnloadModule: "evdev"
[  4583.789] (II) Unloading evdev
[  4584.270] Server terminated successfully (0). Closing log file.



Qualcuno sa aiutarmi?
Ultima modifica di untamed il 15 febbraio 2012, 22:07, modificato 1 volta in totale.
untamed
Newbie
 
Messaggi: 14
Iscritto il: 11 maggio 2011, 16:13
Top

Messaggio14 febbraio 2012, 0:25 - [Risolto] Problema con X #115063

riesci ad avviare una sessione non-kde, più che aggiornaementi hai fatto modifiche a kdm per caso.. prova ad avviare kdm e vedi che errore ti da, in alternativa prova ad avviare twm e vedi se parte...
Se avete risolto il vostro problema, editate il primo post aggiungendo [Risolto] al titolo.
Problemi con Arch ? 1°Metodo-2°Metodo-3°Metodo
ArchWiki Translation Team - Cerchiamo traduttori!
Avatar utente
veleno77
Moderatore
 
Messaggi: 5993
Iscritto il: 25 marzo 2008, 19:26
Località: Torino
Top

Messaggio14 febbraio 2012, 23:09 - [Risolto] Problema con X #115143

Il pc in questione lo uso solo io e sono assolutamente certo di non aver smanettato alcunchè.
Se lancio twm mi spara una schermata nera come se il monitor andasse in standby e non posso far niente se non connettermi in ssh dal portatile e killare twm.
Per quanto riguarda kdm vedo che è già attivo tra i processi, quindi funziona.
Non so davvero che pesci pigliare... :(
untamed
Newbie
 
Messaggi: 14
Iscritto il: 11 maggio 2011, 16:13
Top

Messaggio15 febbraio 2012, 19:53 - [Risolto] Problema con X #115223

Disabilita l'avvio automatico di kde all'avvio e prova a lanciare una sessione a caso, così da verificare che il server X funzioni regolarmente:

Crea uno .xinitrc nella tua home con questo contenuto:
Codice: Seleziona tutto
twm &
xterm


Poi avvia con startx. Se parte, chiudi Xorg e modifica lo .xinitrc in:
Codice: Seleziona tutto
ck-launch-session startkde


Poi ridai startx.
Q6600 @ 3.2 Ghz + Thermalright Ultra 120 Extreme | 2 GB DDR2 Ocz Gold
Asus P5K | Geforce 8800GTS 512 MB | E ovviamente... Arch Linux :)
Avatar utente
Hilinus
Moderatore
 
Messaggi: 5332
Iscritto il: 25 ottobre 2008, 19:28
Top

Messaggio15 febbraio 2012, 22:07 - [Risolto] Problema con X #115249

Vi ringrazio per l'aiuto ma ho risolto lanciando un update del sistema. Una volta fatto si è rimesso a funzionare... Mah...
untamed
Newbie
 
Messaggi: 14
Iscritto il: 11 maggio 2011, 16:13
Top


Torna a Desktop

Chi c’è in linea

Visitano il forum: Nessuno e 1 ospite

Moderatori: 4javier, aleph, veleno77, adriano, Hilinus