Arch Linux

[marcotux]

Salve a tutti, sono nuovo del forum (e anche di Arch)! Ho installato Arch su un notebook Toshiba. Va tutto benissimo tranne che, ogni tanto senza alcuna spiegazione plausibile, lo schermo si spegne e non ne vuole sapere di riprendersi con alcuna combinazione di tasti.. Help me please..

[4javier]

Si spegne ad intervalli regolari? potrebbe essere un malfunzionamento del risparmio energetico. Posta il modello preciso di notebook.

[marcotux]

TOSHIBA SATELLITE A300D - 14E
Intervalli per nulla regolari: a volte dopo 1 minuto che è acceso, altre volte sta acceso ore; a volte se lo lascio acceso senza usarlo, a volte mentre lo uso..

[4javier]

Si spegne solo il monitor? Il resto dei componenti li senti funzionare? Succede solo con arch? Prova anche con un'altra distro, magari live così non perdi tempo ad installare.

[marcotux]

Quando ero su Ubuntu non mi è mai successa.
Si sentono i bip se schiaccio troppi tasti e non ho altri modi per interagire con il sistema.. googlando ho trovato di installare xscreensaver, l ho installato ma essendo molto casuale non so ancora se funziona.. Cmq se mi risuccede provo con una qualche livecd....

[marcotux]

Il problema non è risolto... il monitor sembra stancarsi di funzionare quando gli pare e piace...
Domani proverò con una live...

[veleno77]

che ambiente desktop usi? non vorrei ci sia anche un blocco nelle opzioni energetiche, controllerei anche la frequenza video dello schermo se è corretto

[marcotux]

Gnome.. Come faccio a vedere se ho quel blocco di cui parli?

PS: L'unica cosa che ho installato probabilmente di non troppo stabile è cairo-dock.. Può essere causa sua?

[marinz]

Anch'io ho riscontrato lo stesso problema sul muletto dopo l'aggiornamento di Xorg alla versione 1.9: nel mio caso, dopo un tempo random max fino a 2 giorni, si killa X, killano tutte le applicazioni grafiche e muore anche la tastiera.

Nel mio caso però non mi lamento neanche perchè tanto ho in esecuzione tutti processi che non richiedono X attivo

[4javier]

@el_cammello
ma rimani in una console reale? Se così fosse sarebbe un problema diverso perchè a marcotux "muore" proprio il display.
OT
Controlla l'occupazione di risorse da parte di X, io ho riscontrato un memory leak con l'ultima versione, ed ho anche aperto un post qui sul forum a riguardo.

[marinz]

@el_cammello
ma rimani in una console reale? Se così fosse sarebbe un problema diverso perchè a marcotux "muore" proprio il display.

No no muore proprio il video

Se accedo fisicamente al muletto e provo ad accendere il monitor, resta in standby perchè la scheda video non da più in uscita il segnale.

In più la tastiera me la ritrovo morta, ho provato con il control alt canc o altre robe ma il pc non esegue nulla.

La prima volta che l'avevo trovato in quello stato avevo pensato subito ad un kernel panic, però i led di block e maiusc non lampeggiavano come quando capita nelle situazioni di kernel panic, e infatti provando a pingarlo e provando quindi a connettermi da remoto con ssh, avevo visto che i processi comunque erano rimasti attivi e funzionanit. Il pc in pratica resta funzionante, tranne la tastiera, il video e X.

Questa cosa su 3 pc che uso con Arch mi è capitata (fortunatamente) solo sul muletto dove ora uso solo processi che possono andare anche senza X, per questo non mi sono sbattuto neanche più di tanto per downgradare X o cercare soluzioni.

[4javier]

visto che hai accesso ssh, non ti è venuto in mente di controllare dmesg? Potrebbe essere utile anche a marcotux se il problema fosse uguale.

[veleno77]

ma sui vari errors.log e everythings.log non avete nessun errore?

[marcotux]

E' risuccesso e ho attacaìcato il pc ad un altro monitor, sono riuscito cosi a salvarmi su un file l'esito di mseg:

Codice: Seleziona tutto

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Sep 29 08:45:18 CEST 2010
Command line: root=/dev/disk/by-uuid/69de7f3a-d98a-425b-a6dd-ff2ac5f1020c ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cdec0000 (usable)
 BIOS-e820: 00000000cdec0000 - 00000000cdedc000 (ACPI data)
 BIOS-e820: 00000000cdedc000 - 00000000cdede000 (ACPI NVS)
 BIOS-e820: 00000000cdede000 - 00000000ce000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000132000000 (usable)
NX (Execute Disable) protection: active
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x132000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-E3FFF uncachable
  E4000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFC0000000 write-back
  2 base 00C0000000 mask FFF8000000 write-back
  3 base 00C8000000 mask FFFC000000 write-back
  4 base 00CC000000 mask FFFE000000 write-back
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000132000000 aka 4896M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000ce000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcdec0 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009dc00 (usable)
 modified: 000000000009dc00 - 00000000000a0000 (reserved)
 modified: 00000000000d2000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000cdec0000 (usable)
 modified: 00000000cdec0000 - 00000000cdedc000 (ACPI data)
 modified: 00000000cdedc000 - 00000000cdede000 (ACPI NVS)
 modified: 00000000cdede000 - 00000000ce000000 (reserved)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000fec00000 - 00000000fec10000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000fff00000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000132000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f7f30] f7f30
init_memory_mapping: 0000000000000000-00000000cdec0000
 0000000000 - 00cde00000 page 2M
 00cde00000 - 00cdec0000 page 4k
kernel direct mapping tables up to cdec0000 @ 16000-1c000
init_memory_mapping: 0000000100000000-0000000132000000
 0100000000 - 0132000000 page 2M
kernel direct mapping tables up to 132000000 @ 1a000-20000
RAMDISK: 37e52000 - 37ff0000
ACPI: RSDP 00000000000f7e70 00024 (v02 TOSQCI)
ACPI: XSDT 00000000cdece645 00064 (v01 TOSQCI TOSQCI00 06040000  LTP 00000000)
ACPI: FACP 00000000cdedb870 000F4 (v03 T0SQCI TOSQCI00 06040000 LOHR 000F4240)
ACPI: DSDT 00000000cdece6a9 0D1C7 (v01 TOSQCI TOSQCI00 06040000 MSFT 03000000)
ACPI: FACS 00000000cdeddfc0 00040
ACPI: TCPA 00000000cdedb9d8 00032 (v02 TOSQCI TOSQCI00 06040000 LOHR 00000000)
ACPI: APIC 00000000cdedba0a 0005E (v01 TOSQCI ? APIC   06040000  LTP 00000000)
ACPI: MCFG 00000000cdedba68 0003C (v01 TOSQCI   MCFG   06040000  LTP 00000000)
ACPI: HPET 00000000cdedbaa4 00038 (v01 TOSQCI HPETTBL  06040000  LTP 00000001)
ACPI: BOOT 00000000cdedbadc 00028 (v01 TOSQCI $SBFTBL$ 06040000  LTP 00000001)
ACPI: SSDT 00000000cdedbb04 00386 (v01 TOSQCI POWERNOW 06040000  LTP 00000001)
ACPI: SLIC 00000000cdedbe8a 00176 (v01 TOSQCI TOSQCI00 06040000  LTP 00000000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880002000000-ffff880005bfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00132000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x000cdec0
    0: 0x00100000 -> 0x00132000
On node 0 totalpages: 1048141
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3925 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 825080 pages, LIFO batch:31
  Normal zone: 2800 pages used for memmap
  Normal zone: 202000 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538301 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [1b220 - 1ba1f]
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
PM: Registered nosave memory: 00000000cdec0000 - 00000000cdedc000
PM: Registered nosave memory: 00000000cdedc000 - 00000000cdede000
PM: Registered nosave memory: 00000000cdede000 - 00000000ce000000
PM: Registered nosave memory: 00000000ce000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at ce000000 (gap: ce000000:12000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88832 r8192 d21760 u1048576
pcpu-alloc: s88832 r8192 d21760 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1031005
Kernel command line: root=/dev/disk/by-uuid/69de7f3a-d98a-425b-a6dd-ff2ac5f1020c ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
early_res array is doubled to 128 at [23a40 - 24a3f]
Subtract (57 early reservations)
  #1 [0001000000 - 00016f9598]   TEXT DATA BSS
  #2 [0037e52000 - 0037ff0000]         RAMDISK
  #3 [00016fa000 - 00016fa214]             BRK
  #4 [00000f7f40 - 0000100000]   BIOS reserved
  #5 [00000f7f30 - 00000f7f40]    MP-table mpf
  #6 [000009dc00 - 000009e171]   BIOS reserved
  #7 [000009e2fd - 00000f7f30]   BIOS reserved
  #8 [000009e171 - 000009e2fd]    MP-table mpc
  #9 [0000010000 - 0000012000]      TRAMPOLINE
  #10 [0000012000 - 0000016000]     ACPI WAKEUP
  #11 [0000016000 - 000001a000]         PGTABLE
  #12 [000001a000 - 000001b000]         PGTABLE
  #13 [00016fa240 - 00016fb240]         BOOTMEM
  #14 [000001b000 - 000001b210]         BOOTMEM
  #15 [0001efc000 - 0001efd000]         BOOTMEM
  #16 [0001efd000 - 0001efe000]         BOOTMEM
  #17 [0002000000 - 0005c00000]        MEMMAP 0
  #18 [00016fb240 - 0001713240]         BOOTMEM
  #19 [0001713240 - 000172b240]         BOOTMEM
  #20 [000172b240 - 0001743240]         BOOTMEM
  #21 [0001744000 - 0001745000]         BOOTMEM
  #22 [00016f95c0 - 00016f9601]         BOOTMEM
  #23 [00016f9640 - 00016f9683]         BOOTMEM
  #24 [00016f96c0 - 00016f9998]         BOOTMEM
  #25 [00016f99c0 - 00016f9a28]         BOOTMEM
  #26 [00016f9a40 - 00016f9aa8]         BOOTMEM
  #27 [00016f9ac0 - 00016f9b28]         BOOTMEM
  #28 [00016f9b40 - 00016f9ba8]         BOOTMEM
  #29 [00016f9bc0 - 00016f9c28]         BOOTMEM
  #30 [00016f9c40 - 00016f9ca8]         BOOTMEM
  #31 [00016f9cc0 - 00016f9d28]         BOOTMEM
  #32 [00016f9d40 - 00016f9da8]         BOOTMEM
  #33 [00016f9dc0 - 00016f9e28]         BOOTMEM
  #34 [00016f9e40 - 00016f9ea8]         BOOTMEM
  #35 [00016f9ec0 - 00016f9f28]         BOOTMEM
  #36 [00016f9f40 - 00016f9fa8]         BOOTMEM
  #37 [00016f9fc0 - 00016f9fe0]         BOOTMEM
  #38 [0001743240 - 0001743260]         BOOTMEM
  #39 [0001743280 - 00017432bf]         BOOTMEM
  #40 [00017432c0 - 00017432ff]         BOOTMEM
  #41 [0001800000 - 000181d000]         BOOTMEM
  #42 [0001900000 - 000191d000]         BOOTMEM
  #43 [0001743300 - 0001743308]         BOOTMEM
  #44 [0001743340 - 0001743348]         BOOTMEM
  #45 [0001743380 - 0001743388]         BOOTMEM
  #46 [00017433c0 - 00017433d0]         BOOTMEM
  #47 [0001743400 - 0001743540]         BOOTMEM
  #48 [0001743540 - 00017435a0]         BOOTMEM
  #49 [00017435c0 - 0001743620]         BOOTMEM
  #50 [0001745000 - 000174d000]         BOOTMEM
  #51 [000191d000 - 0001d1d000]         BOOTMEM
  #52 [0005c00000 - 0005e00000]         BOOTMEM
  #53 [0005e00000 - 0009e00000]         BOOTMEM
  #54 [000174d000 - 000176d000]         BOOTMEM
  #55 [000176d000 - 00017ad000]         BOOTMEM
  #56 [000001ba40 - 0000023a40]         BOOTMEM
Memory: 4049608k/5013504k available (3544k kernel code, 820940k absent, 142956k reserved, 1832k data, 488k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
NR_IRQS:768
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 43253760 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2000.275 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4002.23 BogoMIPS (lpj=6667573)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 00cdf00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Turion(tm) X2 Dual-Core Mobile RM-70 stepping 01
Booting Node   0, Processors  #1 Ok.
TSC synchronization [CPU#0 -> CPU#1]:
Measured 90161475 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (8003.10 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
TOM: 00000000ce000000 aka 3296M
Fam 10h mmconf [e0000000, efffffff]
TOM2: 0000000132000000 aka 4896M
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-0a] at [mem 0xe0000000-0xe0afffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe0afffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0xce000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:11.0: reg 10: [io  0x8430-0x8437]
pci 0000:00:11.0: reg 14: [io  0x8424-0x8427]
pci 0000:00:11.0: reg 18: [io  0x8428-0x842f]
pci 0000:00:11.0: reg 1c: [io  0x8420-0x8423]
pci 0000:00:11.0: reg 20: [io  0x8400-0x840f]
pci 0000:00:11.0: reg 24: [mem 0xf0508000-0xf05083ff]
pci 0000:00:12.0: reg 10: [mem 0xf0504000-0xf0504fff]
pci 0000:00:12.1: reg 10: [mem 0xf0505000-0xf0505fff]
pci 0000:00:12.2: reg 10: [mem 0xf0508400-0xf05084ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xf0506000-0xf0506fff]
pci 0000:00:13.1: reg 10: [mem 0xf0507000-0xf0507fff]
pci 0000:00:13.2: reg 10: [mem 0xf0508800-0xf05088ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io  0x01f0-0x01f7]
pci 0000:00:14.1: reg 14: [io  0x03f4-0x03f7]
pci 0000:00:14.1: reg 18: [io  0x0170-0x0177]
pci 0000:00:14.1: reg 1c: [io  0x0374-0x0377]
pci 0000:00:14.1: reg 20: [io  0x8410-0x841f]
pci 0000:00:14.2: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff 64bit]
pci 0000:01:00.0: reg 20: [io  0x9000-0x90ff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:02.0:   bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0x0000-0x0000] (disabled)
pci 0000:00:04.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:00:04.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xf0300000-0xf0303fff 64bit]
pci 0000:04:00.0: reg 18: [io  0xa000-0xa0ff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:06.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:06.0:   bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:07.0: PCI bridge to [bus 05-07]
pci 0000:00:07.0:   bridge window [io  0x0000-0x0000] (disabled)
pci 0000:00:07.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:00:07.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
pci 0000:09:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:09:01.0: reg 14: [mem 0xf0402000-0xf04027ff]
pci 0000:09:01.0: supports D1 D2
pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.0: PME# disabled
pci 0000:09:01.2: reg 10: [mem 0xf0402800-0xf04028ff]
pci 0000:09:01.2: supports D1 D2
pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.2: PME# disabled
pci 0000:09:01.3: reg 10: [mem 0xf0401000-0xf0401fff]
pci 0000:09:01.3: supports D1 D2
pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.3: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 09-0b] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:14.4:   bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xce000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PB2_._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PB7_._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PB6_._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:02:00.0: no compatible bridge window for [mem 0xf0200000-0xf020ffff 64bit]
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 00000000cdec0000 - 00000000cfffffff
reserve RAM buffer: 0000000132000000 - 0000000133ffffff
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfec00000-0xfec10fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [io  0x0220-0x022f] has been reserved
system 00:08: [io  0x040b] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x04d6] has been reserved
system 00:08: [io  0x0530-0x0537] has been reserved
system 00:08: [io  0x0c00-0x0c01] has been reserved
system 00:08: [io  0x0c14] has been reserved
system 00:08: [io  0x0c50-0x0c52] has been reserved
system 00:08: [io  0x0c6c] has been reserved
system 00:08: [io  0x0c6f] has been reserved
system 00:08: [io  0x0cd0-0x0cd1] has been reserved
system 00:08: [io  0x0cd2-0x0cd3] has been reserved
system 00:08: [io  0x0cd4-0x0cd5] has been reserved
system 00:08: [io  0x0cd6-0x0cd7] has been reserved
system 00:08: [io  0x0cd8-0x0cdf] has been reserved
system 00:08: [io  0x8000-0x805f] has been reserved
system 00:08: [io  0x8100-0x81ff window] has been reserved
system 00:08: [io  0x8200-0x82ff window] has been reserved
system 00:08: [io  0x0f40-0x0f47] has been reserved
system 00:08: [io  0x087f] has been reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:09: [mem 0xff800000-0xff80ffff] has been reserved
pci 0000:00:04.0: BAR 14: assigned [mem 0xce000000-0xce1fffff]
pci 0000:00:04.0: BAR 15: assigned [mem 0xce200000-0xce3fffff 64bit pref]
pci 0000:00:05.0: BAR 14: assigned [mem 0xce400000-0xce5fffff]
pci 0000:00:05.0: BAR 15: assigned [mem 0xce600000-0xce7fffff 64bit pref]
pci 0000:00:07.0: BAR 14: assigned [mem 0xce800000-0xce9fffff]
pci 0000:00:07.0: BAR 15: assigned [mem 0xcea00000-0xcebfffff 64bit pref]
pci 0000:00:04.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:05.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:07.0: BAR 13: assigned [io  0x3000-0x3fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:02.0:   bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 0: assigned [mem 0xce000000-0xce00ffff 64bit]
pci 0000:02:00.0: BAR 0: set to [mem 0xce000000-0xce00ffff 64bit] (PCI address [0xce000000-0xce00ffff]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:04.0:   bridge window [mem 0xce000000-0xce1fffff]
pci 0000:00:04.0:   bridge window [mem 0xce200000-0xce3fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:05.0:   bridge window [mem 0xce400000-0xce5fffff]
pci 0000:00:05.0:   bridge window [mem 0xce600000-0xce7fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:06.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:06.0:   bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:06.0:   bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 05-07]
pci 0000:00:07.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:07.0:   bridge window [mem 0xce800000-0xce9fffff]
pci 0000:00:07.0:   bridge window [mem 0xcea00000-0xcebfffff 64bit pref]
pci 0000:09:01.0: BAR 0: assigned [mem 0xf0400000-0xf0400fff]
pci 0000:09:01.0: BAR 0: set to [mem 0xf0400000-0xf0400fff] (PCI address [0xf0400000-0xf0400fff]
pci 0000:00:14.4: PCI bridge to [bus 09-0b]
pci 0000:00:14.4:   bridge window [io  disabled]
pci 0000:00:14.4:   bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:14.4:   bridge window [mem pref disabled]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: enabling device (0000 -> 0003)
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: enabling device (0000 -> 0003)
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: resource 6 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: resource 8 [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: resource 10 [mem 0x000de000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: resource 12 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: resource 13 [mem 0xce000000-0xdfffffff]
pci_bus 0000:00: resource 14 [mem 0xf0000000-0xffffffff]
pci_bus 0000:00: resource 15 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 16 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xce000000-0xce1fffff]
pci_bus 0000:02: resource 2 [mem 0xce200000-0xce3fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xce400000-0xce5fffff]
pci_bus 0000:03: resource 2 [mem 0xce600000-0xce7fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xf0300000-0xf03fffff]
pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xce800000-0xce9fffff]
pci_bus 0000:05: resource 2 [mem 0xcea00000-0xcebfffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:09: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 5 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:09: resource 6 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:09: resource 7 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:09: resource 8 [mem 0x000da000-0x000dbfff]
pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:09: resource 10 [mem 0x000de000-0x000dffff]
pci_bus 0000:09: resource 11 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:09: resource 12 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:09: resource 13 [mem 0xce000000-0xdfffffff]
pci_bus 0000:09: resource 14 [mem 0xf0000000-0xffffffff]
pci_bus 0000:09: resource 15 [io  0x0000-0x0cf7]
pci_bus 0000:09: resource 16 [io  0x0d00-0xffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1656k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005e00000 - ffff880009e00000
software IO TLB at phys 0x5e00000 - 0x9e00000
Simple Boot Flag at 0x37 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1288273736.499:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7912
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 43 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 44 for MSI/MSI-X
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 488k freed
udev[38]: starting version 163
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part ccc
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xf0508000 port 0xf0508280 irq 22
ata1.00: ATAPI: PIONEER DVD-RW  DVRTD08A, 1.50, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVRTD08A 1.50 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: softreset failed (device not ready)
ata3: applying SB600 PMP SRST workaround and retrying
irq 9: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.35-ARCH #1
Call Trace:
 <IRQ>  [<ffffffff810b1a36>] __report_bad_irq.clone.1+0x26/0xa0
 [<ffffffff810b1c3e>] note_interrupt+0x18e/0x1d0
 [<ffffffff810b295d>] handle_fasteoi_irq+0xcd/0x100
 [<ffffffff8100d00d>] handle_irq+0x1d/0x30
 [<ffffffff8100cc87>] do_IRQ+0x67/0xf0
 [<ffffffff81373b93>] ret_from_intr+0x0/0x11
 <EOI>  [<ffffffff8102edc6>] ? native_safe_halt+0x6/0x10
 [<ffffffff810131da>] default_idle+0x3a/0xd0
 [<ffffffff81008236>] cpu_idle+0xa6/0x100
 [<ffffffff8136b034>] start_secondary+0x215/0x21c
handlers:
[<ffffffff8121d218>] (acpi_irq+0x0/0x2c)
Disabling IRQ #9
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
udev[767]: starting version 163
ACPI: acpi_idle registered with cpuidle
input: PC Speaker as /devices/platform/pcspkr/input/input1
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (63 C)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
sky2: driver version 1.28
sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 FE+ chip revision 0
sky2 0000:04:00.0: irq 45 for MSI/MSI-X
sky2 0000:04:00.0: eth0: addr 00:1e:68:ca:c0:8a
ACPI: AC Adapter [ACAD] (on-line)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
Detected Toshiba ACPI Bluetooth device - installing RFKill handler
EDAC MC: Ver: 2.1.0 Sep 29 2010
toshiba_bluetooth: Re-enabling Toshiba Bluetooth
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0508400
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0508800
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
ACPI: WMI: Mapper loaded
cfg80211: Calling CRDA to update world regulatory domain
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 17, io mem 0xf0504000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 17, io mem 0xf0505000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0506000
input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xf0507000
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input6
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 3
ACPI: Battery Slot [BAT1] (battery present)
usb 4-3: new full speed USB device using ohci_hcd and address 2
EDAC amd64_edac:  Ver: 3.3.0 Sep 29 2010
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:09:01.2: SDHCI controller found [1217:7120] (rev 2)
sdhci-pci 0000:09:01.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
mmc0: Unknown controller version (2). You may experience problems.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:09:01.2] using DMA
acpi device:01: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
firewire_ohci 0000:09:01.0: enabling device (0015 -> 0017)
firewire_ohci 0000:09:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
usb 3-1: new full speed USB device using ohci_hcd and address 2
firewire_ohci: Added fw-ohci device 0000:09:01.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0
[drm] Initialized drm 1.1.0 20060810
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input8
generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input9
generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
HDA Intel 0000:00:14.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
firewire_core: created device fw0: GUID 00d05100012dd5f1, S400
ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath9k 0000:02:00.0: setting latency timer to 64
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV620 0x1002:0x95C4).
[drm] register mmio base: 0xCFEF0000
[drm] register mmio size: 65536
ATOM BIOS: M82XT
[drm] Clocks initialized !
radeon 0000:01:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 2025876 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:01:00.0: irq 47 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV620 Microcode
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Default TV standard: PAL-CN
[drm] Default TV standard: PAL-CN
[drm] Default TV standard: PAL-CN
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   LVDS
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[drm] Connector 1:
[drm]   VGA
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm]   DIN
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:
[drm]   HDMI-A
[drm]   HPD1
[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 4096000
[drm] fb depth is 24
[drm]    pitch is 5120
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR9280 Rev:2 mem=0xffffc90000c00000, irq=16
Console: switching to colour frame buffer device 160x50
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Adding 265068k swap on /dev/sda2.  Priority:-1 extents:1 across:265068k
sky2 0000:04:00.0: eth0: enabling interface
EXT4-fs (sda3): re-mounted. Opts: commit=0
EXT4-fs (sda4): re-mounted. Opts: commit=0
fuse init (API version 7.14)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:18:84:1c:3a:0d (try 1)
wlan0: authenticated
wlan0: associate with 00:18:84:1c:3a:0d (try 1)
wlan0: RX AssocResp from 00:18:84:1c:3a:0d (capab=0x411 status=0 aid=4)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: IT
You have old & broken userspace please consider updating mesa
wlan0: no IPv6 routers present
lo: Disabled Privacy Extensions

[marcotux]

In questo momento sono da Livecd di ubuntu e sembra reggere....

[4javier]

Purtroppo dal dmesg non ho visto nulla di utile... La prossima volta prova a salvare anche i due file proposti da veleno e magari /var/log/Xorg.0.log anche se quest'ultimo mi pare difficile possa essere di una qualche utilità

[veleno77]

@marcotux perfavore usa i tag code la prossima volta, so che attualmente non ci sono i tastini ma puoi metterli manualmente. per info http://www.archlinux.it/forum/help.php#bbcode

[marcotux]

sorry...i will..

[marcotux]

ho salvato anche i file "error.log" e "everithing.log" ma sono molto lunghi.. posto tra ?

[4javier]

[*code] e [*/code] e leva gli asterischi.

[marcotux]

Codice: Seleziona tutto

         
Oct 24 22:35:01 myhost syslog-ng[1753]: Configuration reload request received, $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) starting$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> (wlan0): device state chang$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> (wlan0): device state chang$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0/wireless)$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> (wlan0): device state chang$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> (wlan0): device state chang$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> (wlan0): device state chang$
                              [ Read 35842 lines ]
^G Get Help  ^O WriteOut  ^R Read File ^Y Prev Page ^K Cut Text  ^C Cur Pos
^X Exit      ^J Justify   ^W Where Is  ^V Next Page ^U UnCut Text^T To Spell


[Hilinus]

Hai salvato pure l'interfaccia di nano Se non hai la grafica, usa un tool a riga di comando tipo wgetpaste per upparli e posta qua i link che ti da.

[marcotux]

Codice: Seleziona tutto


  GNU nano 2.2.5              File: file1.log                                   

Oct 24 22:35:01 myhost syslog-ng[1753]: Configuration reload request received, $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) starting$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> (wlan0): device state chang$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> (wlan0): device state chang$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> (wlan0): device state chang$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 1 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0) Stage 2 $
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> (wlan0): device state chang$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Activation (wlan0/wireless)$
Oct 24 22:35:02 myhost NetworkManager[1833]: <info> Config: added 'ssid' value $
                              [ Read 35840 lines ]
^G Get Help  ^O WriteOut  ^R Read File ^Y Prev Page ^K Cut Text  ^C Cur Pos
^X Exit      ^J Justify   ^W Where Is  ^V Next Page ^U UnCut Text^T To Spell


[marcotux]

Mi da errore il browser se provo a inviare un mess cosi lungo.. Non c'è un modo per allegare dei file?

[4javier]

mettili su pastebin e linka.